Are you looking for a way to add some greenery to your home or office but don’t have a lot of space to work with? If so, then a rectangle planter box in NZ might be the perfect solution for you!
A rectangle planter box is a great way to add some greenery to your space without taking up too much room. They are also relatively easy to build, which makes them a great option for DIY enthusiasts.
In this article, we will provide a step-by-step guide on how to build your own planter box. We will also include a list of tools and materials that you will need to complete the project. So if you are ready to get started, then read on!
Tools You Will Need:
The following is a list of tools that you will need to complete this project.
- Measuring Tape: This is used for measuring the wood that you will be using for your planter box.
- Drill and Drill Bit: This is used for drilling holes in the wood so that you can screw it together.
- Hammer: This is used for hammering nails into the wood.
- Tape Measure: This is used for measuring the length, width, and height of each piece of wood that will be used to make your planter box.
- Hand Saw: This is used to cut off wood pieces from larger pieces of lumber or plywood. If you do not have access to a saw, then you can use a circular saw or jigsaw instead.
Materials You Will Need
Below, we have provided a list of the various materials that you should consider using:
- Wood (2x4s): You will need to use 2x4s for this project. These are available at most hardware stores or online retailers like Amazon. If you don’t have access to these types of stores, then you can consider using cedar wood or any other type of wood that is suitable for outdoor use.
- Door hinges: These are used to secure the doors on either side of your planter box. You can find these at most hardware stores or online retailers. If they aren’t available locally, then consider ordering them online so they will be shipped directly to your home without any additional hassle on your part!
- Screws: You’ll need these to connect everything together and keep it sturdy during use! Make sure you get screws with plenty of torque, so they don’t break off when placed under pressure during use!
- Nails/staples: These are optional but helpful if you want extra support for your planter box.
3 Steps to Build a Planter Box:
-
Measuring and Cutting the Wood for Your Rectangle Planter Box:
You will need to measure and cut two pieces of wood for each side of your planter box. We recommend using 2x4s or 2x6s for this step. You can also use pressure-treated wood if you want to prevent rot from occurring in your planter boxes over time.
-
Assembling Your Planter Box:
Once you have measured and cut the two pieces of wood for each side of your planter box, you can begin assembling them together. We recommend using dowel pins or screws to hold them together while they dry. Once they are dry, apply wood glue between them before attaching them permanently with nails or screws if necessary.
-
Finishing Off Your Planter Box:
After you have assembled your planter box, it is time to finish the project. To do this, we recommend that you seal the wood with a polyurethane or other finishing product. This will help protect it from moisture and make it last longer.
Afterward, you can add any type of mulch or soil to fill up the planter box. You can also add small plants or flowers if you would like. And finally, place your new planter box somewhere in your home or office!
Wrap up:
Building your own rectangle planter box in NZ is a great way to add some greenery to your space without taking up too much room. It also gives you the opportunity to customize it with whatever color stain or paint you want so that it matches your decor perfectly!
